串行通信模块 COMX 90CA-RE

Modbus TCPEtherCATPowerlink

产品概述
COMX 90 通信模块用于集成到现场设备中，为驱动器、机器人及其他自动化组件提供网络连接。所有通信任务在模块内自主执行，与目标设备的主处理器无关。过程数据通过 SPI 从机接口（模式3）交换。该嵌入式模块集成了满足 IEC 62443 要求的硬件与软件，提升现场级别的网络安全。模块在从机模式下支持主流实时以太网协议，并配备两个以太网端口以支持线型拓扑。切换协议只需加载相应固件。内置 Hilscher netX SoC 提供 10 年供货保障。

要点

• 一款硬件设计覆盖主要的工业以太网和 IIoT 网络
• 作为具有 SPI 主机接口的 COMX 51CA-RE 的 CRA 合规替代品，无需重新设计 PCB
• 具备完整的从机接口和板载网络连接器，缩短上市周期
• 支持 IIoT 的扩展用例，如状态监测和预测性维护
• 节能设计，功耗损耗约降低 65%
• 硬件、固件和工具统一，满足工业网络的网络安全要求

支持的协议

• CC-Link IE Field Basic Slave
• OPC UA Server
• MQTT Client
• Sercos Slave
• PROFINET IO-Device
• POWERLINK Controlled Node
• Open Modbus/TCP Server
• Open Modbus/TCP Client
• EtherNet/IP Adapter
• EtherCAT Slave

技术参数
Product — Part number: 1591.100
Product — Brief description: Communication Module Real-Time Ethernet
Communication controller — netX: netX 90
Integrated Memory — RAM: 8 MByte
Integrated Memory — FLASH: 8 MByte serial Flash
Power supply — Supply voltage: +3.3 V DC ± 5 %
Power supply — Typical/maximum current: 201 mA (at 3.3 V) / 206 mA (at 3.0 V)
Power supply — Typical power consumption: 680 mW
Power supply — Power connector: Via system bus connector X1
System interface — Type: Serial dual-port memory interface
System interface — Connector: 50-pin SMT connector, socket
System interface — Pin distance: 1.27 mm
System interface — Dual-port memory size: 32 KByte
System interface — Serial dual-port memory interface: SPI Slave, mode 3
System interface — Baud rate: max. 50 MHz
Communication interface — Communication standard: Ethernet
Communication interface — Interface type: 10BASE-T/100BASE-TX, potential-free
Communication interface — Auto negotiation: supported
Communication interface — Auto cross over: supported
Communication interface — Connector: 2 * RJ45 socket
Diagnostic interface — Type: UART
Diagnostic interface — Connector: Signal at host interface. Available only if integrated in host system.
Display LED display — SYS System Status: green RUN, yellow RDY
Display LED display — COM0, COM1 Communication status: both green/red
Display LED display — ACT0, ACT1 Ethernet activity status: yellow
Display LED display — LINK0, LINK1 Ethernet link status: green
Environment — Ambient temperature range for operation: -20 °C ... +75 °C (Air flow during measurement: 0.5 m/s)
Environment — Ambient temperature range for storage: -40 °C … +85 °C
Environment — Humidity range: 10 % … 95 % relative humidity (non-condensing)
Environment — Altitude: 0 m … 2000 m
Device — Dimensions (L x W x H): 70.1 mm x 32.6 mm x 21.2 mm
Device — Weight: 31 g
Device — Mounting: using screwable metal bolts, according to comX Design Guide
Configuration — Configuration software: Communication Studio
Configuration — API: By application
Conformity — RoHS: yes
Conformance with EMC directives — CE sign: yes
Conformance with EMC directives — UKCA sign: yes
Conformance with EMC directives — Emission: EN 61000-6-4 / BS EN 61000-6-4
Conformance with EMC directives — Immunity: EN 61000-6-2 / BS EN 61000-6-2

技术规格

• 型号: COMX 90CA-RE (零件号 1591.100)
• 主机/系统接口: 串行双口存储器 (SPI Slave, mode 3)，50 针 SMT 插座，双口存储器 32 KByte，最大 SPI 50 MHz
• 以太网: 2 × RJ45，10/100BASE-TX，支持自动协商与自动交叉
• 存储: 8 MByte RAM，8 MByte serial Flash
• 电源: +3.3 V DC ±5%，典型电流 201 mA (3.3 V)，典型功耗 680 mW
• 温度: 工作 -20 °C 至 +75 °C；存储 -40 °C 至 +85 °C
• 尺寸 / 重量: 70.1 × 32.6 × 21.2 mm / 31 g
• 安装: 按 comX Design Guide 使用可拧紧金属螺栓固定
• 配置工具: Communication Studio；API: By application
• 标准 / 合规性: RoHS、CE、UKCA；EMC 发射 EN 61000-6-4，抗扰度 EN 61000-6-2