Product IntroductionWidely used in the installation and maintenance of various large transformer equipment, wind power generation, thermal power generation, power supply bureaus, etc., for oil purification and vacuum hot oil circulation drying. Suitable for purification of insulating oil in transformers of 35KV-110KV-220KV, vacuum drying can be performed simultaneously with filtration. The dual-stage vacuum oil filter provides a dehydration and degassing system to quickly remove moisture, gases, and harmful components such as light hydrocarbons from the oil. It features a precision multi-stage filtration system to effectively remove mechanical impurities; an electric heating constant-temperature automatic control system ensures rapid and uniform oil heating and eliminates "dead oil zones." It includes vacuum pumping and vacuum oil injection functions and can perform ultimate vacuum extraction for transformers and GIS equipment, meeting various on-site requirements.
Working principle and processAfter the treated oil passes through the magnetic filter, it enters the coarse filter heater for heating. The heated oil passes through the second-stage filter via the oil suction pump to the spiral spray atomization system. The insulated oil becomes coarse-grained fog, falls on the reaction tower and enters the vacuum separation chamber where moisture begins to evaporate. The oil mist undergoes multi-dimensional evaporation in the tank to achieve purification through a short cycle. Oil that has been purified, dehydrated, degassed and treated for acidity is completed through a precision filter under action of the oil exhaust pump. Water vapor and hot air separated from the vacuum separation chamber condense into a water tank; remaining hot air and gases are discharged by a vacuum pump after cooling.
Technical parametersItem | Unit | Spec
Model | | SY/ZD-RM-150
Volume of flow | L/min | 150
L/H | | 8000-10000 (Variable frequency adjustable)
Temperature control range | ℃ | 0~100
Working temperature | ℃ | 20~60
Extreme vacuum | pa | ≤20
Working vacuum degree | Mpa | -0.06 ~ -0.099
Gas content in oil | % | ≤0.1
Work pressure | Mpa | ≤0.5
Filtration accuracy | µm | ≤1
Water content in oil | ppm | ≤3
Oil breakdown voltage | KV | ≥65
Heating power | KW | 72
Total power | KW | 80
Power supply | | Three-phase five-wire system 380V 50HZ
Inlet/outlet pipe diameter | mm | 50
Continuous working hours | H | ≥800
Trouble-free working hours | H | ≥8600
Oil quality indicators after insulating oil treatmentPerformance project | Unit | Post-processing indicators | Test method
1. Moisture content | % | none | GB/T511
2. Moisture content | PPM | ≤3 | GB/T7600
3. Pressure resistance value | KV | ≥65KV | GB, DL or IEC standards
4. Residual gas | ≤1% | ≤0.5 | Gas content measurement methods shall be in accordance with relevant GB, DL or IEC standards.
5. Acid value | | 1µm | (as specified)
Product features- The combination of high vacuum, high pumping speed, annular three-dimensional compound flash evaporation technology and microgram technology can efficiently and quickly remove water, dissolved micro water, free carbon and gases.
- Uses multi-layer polymer mesh filtration combined with strong magnetic electrostatic adsorption for impurity removal; large filtration area, high pollutant holding capacity and high filtration accuracy (ß 3 ≥ 1000).
- Compound three-in-one protection device automatically protects high/low oil levels, detects infrared bubbles, controls liquid levels, maintains temperature and protects pressure; high degree of automation and reliable operation.
- Specially suitable for vacuum oil injection, large-scale vacuum pumping and vacuum drying of equipment above 110KV during installation or maintenance.
- Online oil filtration can operate unmanned with operating status indicated by indicator lights.
- Humanized design, low noise, simple operation, long maintenance intervals, low energy consumption and cost savings in operation.
Function of Two-Stage Vacuum Oil FilterThe machine provides high-efficiency dehydration, degassing, filtration and drying of transformer oil. Main components include: oil inlet pump, coarse filter, oil exhaust pump, degassing tank, heater, polymer purifier, magnetic filter, vacuum pumping system, constant temperature automatic oil temperature control system and electrical control cabinet. The mechanical structure and steel frame should be intact and free of defects; surface treated by plastic spraying for a smooth bright finish. The machine performs filtration, purification and regeneration to efficiently remove moisture, gas and mechanical impurities from insulating oil.
Caractéristiques / spécifications techniques- Model: SY/ZD-RM-150
- Rated flow: 150 L/min (8000-10000 L/H, variable frequency adjustable)
- Temperature control range: 0~100 ℃
- Working temperature: 20~60 ℃
- Extreme vacuum: ≤20 Pa
- Working vacuum degree: -0.06 ~ -0.099 Mpa
- Gas content in oil: ≤0.1 %
- Filtration accuracy: ≤1 µm
- Water content in oil after treatment: ≤3 ppm
- Oil breakdown voltage after treatment: ≥65 KV
- Heating power: 72 KW
- Total power: 80 KW
- Power supply: Three-phase five-wire system 380V 50HZ
- Inlet/outlet pipe diameter: 50 mm
- Continuous working hours: ≥800 H
- Trouble-free working hours: ≥8600 H