盘式制动钳 MR series
气动

盘式制动钳
盘式制动钳
添加到我的收藏夹
添加到产品对比表
 

产品规格型号

类型
盘式
驱动类型
气动
制动力

最少: 0.74 kN

最多: 10.8 kN

产品介绍

Twiflex MR系列盘式制动钳适用于12.7mm或25.4mm厚的盘。最小圆盘直径为250mm。MR2的最小光盘直径为460mm。 Normally one or two calipers are used per disc, but the number may be increased depending on disc size. The brakes may be positioned at any angle around the periphery of the disc, but should ideally be mounted horizontally (i.e. at the 3 o’clock or 9 o’clock position). If the caliper mounting angle is greater than 10° from the horizontal, or on vertical shaft applications, it should be fitted with an equalising link. A range of brake discs is available from Howdon (see Disc and Hub Assemblies). For pneumatic operation use dry, filtered and non-lubricated compressed air. Pneumatic brakes require a control valve, operated either manually or by pneumatic or electrical signal. The ratings shown on the graphs are based on fully bedded in and conditioned brake pads with a nominal friction coefficient μ = 0.4. Howdon disc brakes must be used with Twiflex asbestos free brake pads. Effective disc radius = actual radius (m) – 0.03m.
* 显示价格为参考价,此价格不含税、不含运费、不含关税,也不包含因安装或投入使用所产生的其他额外费用。参考价格可能因国家、原材料价格和汇率的不同而产生变化。