Product OverviewG60 不锈钢链条吊索(Grade 60)为由不锈钢起重链和配套承载件制造的起重组件,具备耐腐蚀特性。提供单腿、双腿、三腿和四腿配置,适用于海事、海上、食品加工、化工及工业起重等需要耐腐蚀性和可追溯性的场合。
Introduction该吊索由不锈钢起重链及主环、连接环、缩短装置和起重钩等承载件组成。按负载和起重布置选择链径、有效工作长度和端部配件。选型时应考虑载荷重量、承载腿数、吊索角度、载荷对称性、温度及使用环境。不得超过识别牌上标示的WLL。
Lifting Configuration- 1腿:起吊点应垂直位于载荷重心正上方。
- 2腿:起吊点应位于重心两侧。
- 3腿 / 4腿:将起吊点分布在重心周围以实现受力分配控制。
- 多腿组合时,倾角β须大于15°且不超过60°。
Working Conditions额定WLL在-40°C至+250°C范围内适用。+250°C至+350°C时允许WLL降为75%;+350°C至+450°C时降为50%。对于AISI 318LN Duplex部件,最大使用温度为350°C。在酸、碱或其蒸气环境中使用需确认材料对实际化学环境的耐蚀性。
Load Conditions- 不得扭转或打结链腿。
- 钩子应在钩座承载,不得在钩尖承载。
- 避免冲击载荷和抖动。
- 使用喉套(choker)时,额定WLL降为80%。
- 当无法保证腿间均匀分配载荷时,应根据操作说明中关于不对称载荷的规定降低适用WLL。
High-Cycle Lifting对于超过20,000应力循环的应用(如自动化生产和重复物料搬运),需考虑动态载荷,并按DIN EN 818-7机制组1Bm/M3适当选择链径以降低高循环工况下的应力。
ParameterItem - Specification
Product Name - Stainless Steel Grade 60 Chain Sling
Material - Stainless Steel
Grade - Grade 60
Standard - DIN 5688-1
Configuration - Single Leg / Double Leg / Three Leg / Four Leg
Chain Diameter - Customized
Working Load Limit (WLL) - According to chain diameter and sling configuration
Safety Factor - According to applicable lifting standard
Surface Finish - Blasted
Components - Master Link, Hooks, Connecting Components
Length - Customized
Certification - Test Certificate Available
Application - Marine, Offshore, Chemical, Food Processing, Industrial Lifting
StandardsManufacturing Standards按照下列标准由不锈钢起重链和兼容的起重组件制造:
- DIN 5688-1
- DIN 5687
- DIN 7541
- 适用的DIN EN 818 起重链要求
Testing Standards每件不锈钢链索在交付前均进行检验,包括:
- 材料验证
- 尺寸检查
- 组件检查
- 识别标记检查
- 额定工作载荷(WLL)验证
- 试验(proof test)文件
Application Standards适用于以下起重作业:
- 海事设备搬运
- 海上维护
- 食品加工厂
- 化工行业
- 洁净生产环境
- 工业起重作业
Maintenance Standards定期检查应包括:
在以下情况下应停止使用该吊索:
- 链厚因磨损而减少
- 链环出现永久变形
- 钩具损坏或张开过大
- 发现裂纹或结构性损伤
Technical specifications- Product Name: Stainless Steel Grade 60 Chain Sling
- Brand: TOPONE CHAIN
- Material: Stainless Steel
- Grade: Grade 60
- Standards: DIN 5688-1, DIN 5687, DIN 7541, applicable DIN EN 818
- Configurations: Single-leg, Double-leg, Three-leg, Four-leg
- Chain Diameter: Customized
- Length: Customized
- Working Load Limit (WLL): As marked on product, depends on chain diameter and configuration
- Temperature range for full WLL: -40°C to +250°C
- WLL reduction: +250°C to +350°C → 75%; +350°C to +450°C → 50%
- Surface Finish: Blasted
- Components: Master link, hooks, connecting components
- Certification: Test certificate available; proof test documentation and traceability
- Applications: Marine, offshore, food processing, chemical and industrial lifting
- High-cycle guidance: Consider DIN EN 818-7 and reduce stress for >20,000 cycles
- Inspection & maintenance: Material verification, dimensional and component checks, identification marking, remove from service on wear/deformation/damage
- MOQ: 1 Piece
- Packaging: Carton + Steel Pallet